更新时间：2024-09-21 10:16
张立峰，男，1972年8月出生于河北丰润。他于1998年在北京科技大学获得冶金工程专业博士学位，并成为该校冶金与生态工程学院的院长、教授和博导。他还是教育部长江学者特聘教授、美国自然科学基金会主审评委和中国自然科学基金会材料学部国际评委。他的研究方向包括洁净钢和非金属夹杂物、铝和硅的净化和循环再利用以及冶金过程数值模拟仿真。他曾获得美国钢铁公司协会连续铸钢最佳论文奖和美国材料金属及矿业协会青年领袖奖。目前，他担任北方工业大学的党委副书记和校长。
2012年初回国任北京科技大学冶金与生态工程学院院长。
历任东北大学工学部日本学术振兴会外国人特别研究员、美国伊利诺伊大学厄巴纳-香槟分校机械工程系Research Scientist、挪威科学技术大学材料科学与工程系教授、美国密苏里科技大学材料科学与工程系助理教授、副教授。
2022年1月，任北方工业大学党委副书记、校长。
纯净钢与夹杂物，纯净金属（钢铁、铝、太阳能用硅）的净化、连铸和循环再利用，金属制备过程中的流动、传热、传质、凝固的数值模拟仿真，太阳能用硅和电子废弃物的绿色回收工艺及基础研究。
已经发表230多篇科研论文，其中刊物论文100多篇，多数为国际发表。至2011年9月为止，文章被SCI检索50多篇，EI检索140多篇。所发表的文章被他人引用至少500多次；承担了9项纵向课题，包括自然科学基金重点项目；承担了36项企业项目，涵盖了国内宝钢、首钢集团在内的18家钢铁公司；发表英文刊物论文30篇、中文刊物论文19篇、国内外会议论文60余篇；被授权3项发明专利、27项实用新型专利。为国内外60多个刊物评审稿件。
在国际、国内会议、企业、大学做过160余次演讲，其中多次为主办方邀请。是过程冶金类国际刊物Metallurgical and Materials Transaction B . 和Iron and Steel Technology 审稿委员会委员（Key Reader）。受邀先后为26个国际刊物审理稿件。多次组织主持国际会议，如美国矿物、金属与材料协会（TMS）年度国际会议、美国钢铁公司协会（AIST）年度国际会议、国际太阳能会议、材料科学与技术国际会议、国际资源回收会议等等。
承担和参与了60多项国际研究课题，课题来源：美国自然科学基金、美国能源部、美国国防部、美国模铸冶金学会、挪威学术理事会、欧盟研究基金、德国研究理事会、日本学术振兴会、和一些世界著名的钢铁企业（例如纽柯钢铁、宝钢）、铝业公司（例如海德鲁铝业、美国铝业公司）、太阳能光伏用硅企业等等。
论文
1.Ying Ren,Lifeng Zhang,Shusen Li.“Transient Inclusions Evolution during 钙质 MOD in Linepipe Steels,”ISIJ International,Vol.54,No.12,pp2772-2779
2.Ying Ren,Lifeng Zhang, Wen Yang, Haojian Duan. Formation Mechanism and 热力学 of Mg–Al–Ti–O 情结 Inclusions in Mg-Al-Ti-Deoxidized Steel,Metallurgical and Materials Transactions B,飞鱼座45B,No.6, 2014,pp2057-2071
3.Shengqian Wang, Lifeng Zhang, Anping Dong, Jianwei Gao, Lucas Nana Wiredu Damoah. “Application of Electromagnetic (EM) Separation Technology to 后设l Refining Processes: A Review,” Metallurgical and Materials Transactions B, Vol.45B, 2014, No.6, pp 2153-2185
4.Shengqian Wang, Lifeng Zhang, Yue Tian, Yanlong Li, Haitao Ling. “Separation of Non-metallic Inclusions from Molten Steel Using High 频率 Electromagnetic Fields”, Metallurgical and Materials Transactions B, Vol.45B, No.5,2014,pp1915-1935
5.Lifeng Zhang,Xiaogang Yang, Shusen Li,Ming Li, Wei Ma. “监察 of Transverse Corner Cracks on Low 碳 Steel Slabs,”JOM,Vol.66,No.9,2014,pp.1711-1720
6.Ying Ren,Yufeng Wang, Shusen Li, Lifeng Zhang, Xiangjun Zuo, Simon N. Lekakh, Kent D. Peaslee. “Detection of Non-metallic Inclusions in Steel Continuous Casting Billets,” Metallurgical and Materials Transactions B, 飞鱼座45B,No.4,2014,pp1291-1303
7.Haitao Ling,Lifeng Zhang. “Numerical Simulation of the Growth and Removal of Inclusions in the Molten Steel of a Two-Strand Tundish,”JOM,Vol.65,No.9,2013,pp.11551163
8.Wen Yang,Lifeng Zhang, Xinhua Wang,Ying Ren, Xuefeng Liu, Qinglin Shan.“Characteristics of Inclusions in Low 碳 Al-Killed Steel during Ladle Furnace Refining and 钙质 Treatment,”ISIJ International,飞鱼座53,No. 8,pp1401–1410
9.Jiling Wang,Lifeng Zhang, Shufeng Yang, Yongfeng Chen,Jingyu Li,Alexander Wachsman.“Interaction between Molten Steel, Alumina Lining 耐火材料 and Slag Phase,”Journal of Manufucturing Science and Production,Vol.13,No.1-2,pp133-143
10.Wen Yang,Xinhua Wang, Lifeng Zhang, Wanjun Wang.“Characteristics of Alumina-Based Inclusions in Low 碳 Al-Killed Steel under No-Stirring Condition,” Steel Research International,Vol.84,No.9,2013,pp878-891
11.Wen Yang,Xinhua Wang,Lifeng Zhang, Qinglin Shan, Xuefeng Liu,“Cleanliness of Low Carbon Aluminum-Killed Steels during Secondary Refining Processes,” Steel Research International,Vol.84,No.5,2013,pp473-489
12.Shueng Yang, Lifeng Zhang, Jingshe Li, Kent Peaslee. “Formation and MOD of MgO∙ Al2O3-Based Inclusions in 合金 Steels,” Metallurgical and Materials Transactions B, Vol.43B, No.4, 2012, pp 731-750
13.Lifeng Zhang, Jianwei Gao, Lucas Nana Wiredu Damoah, David G. Robertson, “Removal of Iron from Aluminum: A Review,” Mineral Processing and Extractive Metallurgy Review, 飞鱼座33, 二氧化氮, 2012, pp99-157
14.Lifeng Zhang, Xuewei Lv, Lucas Nana Wiredu Damoah, Chenguang Bai, “Mathematical Modeling on the Removal of Impurity Elements from Molten Aluminum,” Mineral Processing and Extractive Metallurgy Review, Vol.33, No.1, 2012, pp1-54
15.Yufeng Wang, Lifeng Zhang. “Simulation of the Fluid 心流Related Phenomena in the 电解质 of an Aluminum Electrolysis 细胞,” Metallurgical and Materials Transactions B, 飞鱼座42B, No.5, 2011, pp1051-1064
16.Yufeng Wang, Lifeng Zhang. “Fluid Flow Related Transport Phenomena in Steel Slab Continuous Casting Strands under Electromagnetic Brake,” Metallurgical and Materials Transactions B, 飞鱼座42B, No.6, 2011, pp1319-1351
17.Alex Luyima, Shi Honglan, Lifeng Zhang. “Leaching Studies for Metals Recovery from Waste Printed Wiring Boards,” JOM, Vol.63, No.8, 2011, pp. 38-41
18.Alex Luyima, Lifeng Zhang, Lucas Damoah. “Kinetic Analysis of the Thermal Degradation of Printed Wiring Boards,” JOM, Vol.63, No.8, 2011, pp 33-37
19.Lifeng Zhang, Xuewei Lv, Alex T. Torgerson, Mujun Long. “Removal of Impurity Elements from Molten Aluminum: A Review,” Mineral Processing and Extractive Metallurgy Review, 飞鱼座32, No.3, 2011, pp 150-228
20.L. N. W. Damoah, Lifeng Zhang, “AlF3 Reactive Al2O3 Foam 过滤器 for the Removal of Dissolved Impurities from Molten Aluminum: Preliminary Results,” Acta Materialia, Vol.59, No.3, 2011, pp. 896-913
21.Anping Dong, Lifeng Zhang and Lucas N. W. Damoah, “Beneficial and Technological Analysis for the Recycling of Solar Grade 硅 Wastes,” JOM, Vol.63, No.1, 2011, pp23-27
22.Mujun Long, Lifeng Zhang. “A Simple Model to Calculate Dendrite Growth Rate during Steel Continuous Casting Process,” ISIJ International, Vol.50, No.12, 2010, pp.1792-1796
23.Yufeng Wang, Lifeng Zhang, “Study on Transient Fluid Flow Phenomena during Continuous Casting: Part I – Cast Start,” ISIJ International, Vol.50, No.12, 2010, pp1777-1782
24.Yufeng Wang, Lifeng Zhang, “Study on Transient Fluid Flow Phenomena during Continuous Casting: Part II – Cast Speed Change, 温度 Fluctuation, and Steel Grade Mixing,” ISIJ International, 飞鱼座50, No.12, 2010, pp1783-1791
25.L. N. W. Damoah, Lifeng Zhang, “包裹体 Removal from Aluminum through Filtration,” Metallurgical and Materials Transactions B, Vol.41B, No.4, 2010, pp.886-907
26.Mujun Long, Lifeng Zhang, Xiangjun Zuo, “Kinetic Modeling on Nozzle Clogging during Steel Billet Continuous Casting,” ISIJ International, Vol.50, No.5, 2010, pp 712–720
27.Shufeng Yang, Lifeng Zhang, Jingshe Li, Kent Peaslee, “Structure Optimization of Horizontal Continuous Casting Tundishes Using Mathematical Modeling and 液态水 Modeling,” ISIJ International, 飞鱼座49, No.10, 2009, pp1551-1560
28.Lifeng Zhang, Arjan Ciftja, “Recycling of Solar 细胞 硅 Scraps through Filtration, Part I: Experimental Investigation,” Solar 能量 Materials and Solar Cells, 飞鱼座92, No.11, 2008, pp1450-1461
29.Lifeng Zhang, Yufeng Wang, Xiangjun 左姓 “Flow Transport and 包裹体 Motion in Steel Continuous Casting Mold under SEN Clogging Condition,” Metallurgical and Materials Transactions B, 飞鱼座39B, No.4, 2008, pp534-550
30.Jirang Cui, Lifeng Zhang, “Metallurgical recovery of metals from electronic waste: A review,” Journal of Hazardous Materials, Vol.159, No.2-3, 2008, pp.228-256
31.Lifeng Zhang, Subo Yang, Kaike Cai, Jiying Li, Xiaoguang Wan, Brian G. Thomas. “Investigation on the Fluid Flow and Steel Cleanliness in the Continuous Casting Strand,” Metallurgical and Materials Transactions B, Vol.38B, No.1, 2007, pp63-83
32.Lifeng Zhang, Bret Rietow, Brian G. Thomas, Ken Erkin. “Large Inclusions in Plain-碳 Steel Ingots Cast by Bottom Teeming,” ISIJ International, 飞鱼座46, No.5, 2006, 670-679
33.Lifeng Zhang, Brian G. Thomas, “State of the Art in the 监察 of Inclusions during Steel Ingot Casting,” Metallurgical and Materials Transactions B, Vol.37B, No.5, 2006, 733-761
34.Lifeng Zhang, Jun Aoki, Brian G. Thomas. “包裹体 Removal by Bubble Flotation in a Continuous Casting Mold,” Metallurgical and Materials Transactions B, 飞鱼座37B, No.3, 2006, pp361-379
35.Lifeng Zhang, Brian G. Thomas. “State of the Art in Evaluation and 监察 of Steel Cleanliness,” ISIJ International, 2003, Vol.43, No.3, pp. 271-291
36.Lifeng Zhang, Wolfgang Pluschkell. “Nucleation and Growth Kinetics of Inclusions during 羧基液体丁腈橡胶 Steel Deoxidation,” Iron \u0026 Steelmaking, Vol. 30, No.2, 2003, pp106-110
37.Lifeng Zhang, Shoji Taniguchi. “液态水 Model Experiment of 包裹体 Removal by Bubble Flotation under Turbulent Condition,” Ironmaking \u0026 Steelmaking, Vol.29, No.5, 2002, pp.326-336
38.Brian G. Thomas, Lifeng Zhang. “Mathematical Modeling of Fluid Flow in Continuous Casting: a Review,” ISIJ International, Vol.41, No.10, 2001, pp1甲基锡热稳定剂1193
39.Lifeng Zhang, Shoji Taniguchi, Cai Kaike. “Fluid Flow and 包裹体 Removal in Continuous Casting Tundishes,” Metallurgical and Materials Transactions B, Vol.31B, 二氧化氮, 2000, pp.253-266
40.Lifeng Zhang, Shoji Taniguchi. “Fundamental of Inclusion Removal from 羧基液体丁腈橡胶 Steel by bubble flotation,” International Materials Review, Vol.45, No.2, 2000, pp59-82
课程
本科：Transport Phenomena in Metallurgy、钢铁冶金学炼钢部分。
担任中国金属学会青年工作委员会副主任委员；美国矿业金属及材料协会(TMS)过程技术与模型委员会主任（Chair of the Processing Technology and Modeling Committee）；Metallurgical\u0026Materials Transactions B、Metallurgical\u0026Materials Transactions A的审稿委员会主任委员（Key Reader）；ISIJInternational的顾问委员会委员（国际编委）（Advisory Board member）；Metallurgical Research \u0026 Technology（原名：Revue de Métallurgie）编委；Ironmaking and Steelmaking编委（Member of Editorial Board）；国内杂志《炼钢》《连铸》《钢铁》编委；美国矿物、金属与材料协会（TMS）过程技术与模型委员会主任；中国自然科学基金2007年、2010年参会国际评委（Panelist）；2009年中国教育部长江学者计划国际函评评委；美国自然科学基金会2009 年、2010年、2011年参会评委（Panelist）。
张立峰任北方工业大学党委副书记、校长_北京日报APP新闻.北京日报.2022-02-12
河北省政府任免工作人员.河北省人民政府.2020-11-06