更新时间：2024-09-21 08:16
赵兴科，北京科技大学副教授，研究领域为焊接、功能材料与器件、生物医用材料与器件。
2003.02 — 2005.02，中国科学院上海应用物理研究所，博士后；
1999.09 — 2002.09，哈尔滨工业大学材料科学与工程学院，研究生，工学博士；
1990.09 — 1993.06，中国科学院沈阳金属研究所，研究生，工学硕士；
1984.09 — 1988.09，华南理工大学机械工程二系，本科，工学学士。
2005.3——，北京科技大学材料学院，副教授；
1993.6 — 1999.9，哈尔滨工业大学（威海）机械系，讲师、副教授；
1988.6 — 1990.9，济南煤气用具总厂，助工、工程师。
已发表学术论文100余篇。
外文：
Hongbo Sun, Xingke Zhao, Lan Lan, Jihua Huang, Hua Zhang. Preparation of high-porosity NiTi alloys by powder sintering with NaCl pre-forming. Advanced Materials Research. Vols. 152-153 (2011) pp 1342-1345Z. P. Wang, J. H. Huang, H. Zhang,X. K. Zhao. Reactive composite brazing of Cf/碳化硅 composites to Ti alloy with (Ag−6Al) +Ti+C composite filler materials. Materials Science and Technology. 10.1179/174328409X418955Xingke Zhao, Lan Lan, Hongbo Sun, Jihua Huang, Hua Zhang. Preparation of NiTi/NiTiNb Laminated Alloys by Vacuum Brazing. Advanced Materials Research. Vols. 97-101 (2010) pp 1653-1656Xingke Zhao, Lan Lan, Hongbo Sun, Jihua Huang, Hua Zhang. Mechanical properties of additive laser welded NiTi alloy Materials Letters. 64 (2010) 628–631X. K. Zhao, L. Lan, W. Wang, L. Chen, F. J. Liu, J. H. Huang and H. Zhang. Martensitic transformation behaviour of non-Equilibrium heat treated Ni50.9Ti49.1 alloys. Materials Science and Technology. 2009, (Appeared or available online: 2009?12?4?) DOI: DOI 10.1179/026708309X12578491814753J. H. Xiong, J. H. Huang, Z. P. Wang, Y. H. Ban, H. Zhang, X. K. Zhao. Brazing of carbon fibre reinforced SiC composite and Ti alloy using Cu-Ti-C filler materials. Materials Science and Technology. DOI: 10.1179/174328408X393440H. T. Wang, S. Q. Zhang, J. H. Huang, J. L. Zhu, H. Zhang, X. K. Zhao. Fabrication of TiC-Fe cermet coating by plasma spraying of Fe-Ti-C powder using sucrose as carbon source. Materials Science and Technology. DOI: 10.1179/174328409X448466D. H. Cheng, J. H. Huang, H. Zhang, X. K. Zhao. Superplastic deformation of laser welded Ti-6Al-4V sheet. Materials Science and Technology. 2009, (Appeared or available online: 2009?8?26?) DOI: 10.1179/026708309X12468927349217J. Xiong, J. Huang, Z. Wang, G. Lin, H. Zhang and X. Zhao. Joining of Cf/碳化硅 composite to Ti alloy using composite filler materials. Materials Science and Technology 2009, 25(8): 1046-1051Xingke Zhao, Hongbo Sun, Lan Lan, Jihua Huang, Hua Zhang, Yu Wang. Pore structures of high-porosity NiTi alloys made from elemental powders with NaCl temporary space-holders. Materials Letters 63 (2009) 2402-2404Xingke Zhao, Jiawei Tang, Lan Lan, Jihua Huang, Hua Zhang, Yu Wang. Vacuum brazing of NiTi alloy by AgCu eutectic filler. Materials Science and Technology. 2009, 25(12):1495-1497Xingke Zhao, Wei Wang, Li Chen, Fangjun Liu, Geng Chen, Jihua Huang, Hua Zhang. Two-stage superelasticity of a Ce-added laser-welded TiNi alloy Materials Letters. 2008, 62: 3539-3541[EI]Xingke Zhao, Wei Wang, Li Chen, Fangjun Liu, Jihua Huang, Hua Zhang. Microstructures of cerium added laser weld of a TiNi alloy. Materials Letters. 2007, 62(10-11): 1551-1553[EI]Jinglei Zhu, Jihua Huang, Haitao Wang, Shouquan Zhang, Hua Zhang, Xingke Zhao. Microstructure and properties of TiC-Fe36Ni cermet coatings by reactive plasma spraying using 蔗糖 as carbonaceous precursor. Applied surface Science.254(2008) ，20：6687–6692 [EI]Lihua Qi, Jihua Huang, Xingke Zhao, Hua Zhang. Effect of thermal-shearing cycling on Ag3Sn microstructural coarsening in SnAgCu solder. Journal of Alloys and Compounds 469 (2009) 1-2：102–107[EI]L. H. Qi, J. H. Huang, X. K. Zhao and H. Zhang. Microstructure transformation of Sn base solders under isothermal aging and thermal shearing cycling conditions. Materials Science and Technology 2008 VOL 24 NO 10, 1254-1258JingLei Zhu, JiHua Huang, HaiTao Wang, JunLong Xu, Xingke Zhao, Hua Zhang. In-situ synthesis and microstructure of TiC-Fe36Ni composite coatings by reactive detonation-gun spraying. Materials Letters. 2008, 62 (12-13): 2009–2012[EI]Huang, Jihua; Wan, Yun; Zhang, Hua; Zhao, Xingke. TLP bonding of SiCp/2618Al compositesusing mixed Al-Ag-Cu system powders as interlayers. Journal of Materials Science 2007, 42(23): 9746-9749. [EI]Ji-hua Huang, Yue-ling 越南盾, Yun Wan, Xing-ke Zhao and Hua Zhang, “Investigation on reactive diffusion bonding of SiCp/6063 MMC by using mixed powders as interlayers”, Journal of Materials Processing Technology, 2007, 190(1-3): 312-316 (23 July 2007) Jihua Huang，Yun Wan, Hua Zhang, Xingke Zhao. Effect of Ti on TLP Bonding of SiCp/2618 Al Composites using Interlayers of Mixed Al-Ag-Cu System Powders. Materials Science and Technology. 2007,Volume 23, Number, pp87-91Guobiao Lin, Jihua Huang, Huang Zhang, Xingke Zhao,Joints of Cf/碳化硅 Composite to Ti-Alloy with In-Situ Synthesized TiCx Improved Brazing Layers,Materials Transactions, 2006,47(4):1261-1263(SCI、EI)G. B. Lin，J. H. Huang, H.Zhang and X. K.Zhao. Microstructure and mechanical 表演 of brazed joints of Cf/碳化硅 composite and Ti alloy using Ag–Cu–Ti–W. Science and Technology of Welding and Joining. 2006 ,VOL 11 , NO 4 : 379-383Xingke Zhao, Wenxin Li. Morphology and hydrophobicity of a polyurethane film molded on a porous anodic alumina template. surface \u0026 Coatings Technology. 200(2006): 3492~3495 (SCI、EI)Lin,G.B., Huang,J.H., 壮族,H., Zhao,X.K. Brazed joints of Cf-碳化硅 composite to Ti alloy using Ag-Cu-Ti-(Ti+C) mixed powder as interlayer. Powder Metallurgy. 2006, 49(4): 345-348Zhao Xingke, Gao Zhiyong, Cai Wei, Zhao Liancheng. Microstructure of Phosphorus Ion-Implanted TiNi alloy. Journal of Materials Science. Vol. 40, no. 19, Oct. 2005, pp 5291-5293(SCI、EI)Gao zhiyong, Zhao Xingke, Chen Feng, Cai Wei, Zhao Licancheng, Wu Guangheng, Chen Jinglan, Zhan Wenshan. Effect of annealing and thermal cycling on phase transformation behaviour of Ni-Mn-Ga alloy Materials Science and Technology. 2003, 19(6): 691~694(SCI、EI) Li ZC, Zhao XK, Zhang H. Microstructure and superelasticity of severely deformed TiNi alloy，Mater. Lett., 57 (2003) 1086 (SCI) X.K. Zhao, W. Cai, Y. Tian and L.C. Zhao. Microstructure and Hemocompatibility of a Phosphorus Ion-implanted TiNi Shape Memory Alloy. Materials Science Forum. 2002, 394-395: 153~156(SCI、EI) X.K. Zhao, W. Cai, L.C. Zhao. Corrosion Behavior of Phosphorus Ion-PBII Treated Ni50.6Ti49.4 Shape Memory Alloys. surface and Coating Technology. 155(2002):236~238(SCI、EI) Wei Wang, Xingke Zhao, Jihua Huang. Laser welding of TiNi shape memory alloy Proceedings of 3 Pacific International Conference on Application of Lasers and Optics (PICALO), April, 2008, Beijing: 112-115Lihua Qi, Jihua Huang, Hua Li, Xingke Zhao, Hua Zhang. Microstructures transformation in Sn-base solders under the isothermal and thermal-shearing cycling condition. 2006 7th International Conference on Electronic Packaging Technology. (IEEE Cat No. 06EX1520C), 2006, p 5 p (EI)Lihua Qi, Jihua Huang, Hua Li, Xingke Zhao, Hua Zhang. Growth behavior of IMCs and fracture forming mechanism at Sn-Ag-Cu/Cu interfaces under thermal-shearing cycling condition.p 5 pp (EI)Lihua Qi, Jihua Huang, Xingke Zhao, Hua Zhang. Effect of thermal-shearing induced microstructural coarsening on SnAgCu microelectronic solder. ICEPT2007. Proceedings of the Electronic Packaging Technology Conference, EPTC, 2007, Proceedings of the 2007 8th International Conference on Electronic Packaging Technology, ICEPT[EI]Lihua, Qi; Jihua, Huang; Hua, Li; Xingke, Zhao; Hua, Zhang Microstructures transformation in Sn-base solders under the isothermal and thermal-shearing cycling condition. Source: 2006 7th International Conference on 电子学 Packaging Technology, ICEPT '06, 2007, 2006 7th International Conference on Electronics Packaging Technology, ICEPT '06[EI]Qi, Lihua; Huang, Jihua; Zhao, Xingke; Zhang, Hua. Microstructural transformation on snagcu/cu interface induced by thermal-shearing cycling. Source: 10th 电子学 Packaging Technology Conference, EPTC 2008, p 499-505, 2008, 10th Electronics Packaging Technology Conference, EPTC 2008[EI]
中文：
Microstructure and mechanical properties of Ti-6AL-4V joints by laser beam welding
Yang Jing(Univ. of Sci. \u0026 Technol. Beijing, Beijing, China); Cheng Donghai; Huang Jihua; Zhang Hua; Zhao Xingke; Guo HepingSource:Rare Metal Materials and Engineering, v 38, n 2, p 259-62, Feb. 2009 Language: Chinese
Database: Inspec
Abstract - DetailedResearch on microstructure and formation characteristic of laser welded lap joints of TC4 titanium alloy
Database: Inspec
Abstract - DetailedMicrostructure of reactive composite brazing joints of Cf/碳化硅 composite to Ti-6Al-4V alloy with Cu-Ti-C filler material
Abstract - DetailedZhao, Xingke; Wu, Ping; Zhou, Yusheng.
Influence of RE elements on steel weld microstructure. Rejiagong Gongyi/Hot Working Technology, n 5, July 20, 1997, p 6-8 Language: Chinese (EI)Zhao Xingke, Wang Zhong; Cai Wei; Zhao Liancheng. Corrosion resistance of a NiTi alloy in 1% NaCl saline solution. Corrosion Science and Protection Technology, v 13, n 1, Jan. 2001, p 21-3 Language: Chinese (EI)Wang, Wei; Chen, Li; Zhao, Xingke; Huang, Jihua; Li, Hongguang; 越南盾, Xingwen. Effect of laser welding of preset rare 地球 to the welded joint on the functional properties of the Ti-50.9at% ni shape memory alloy. Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, v 37, n 10, p 1819-1823, October 2008 Language: Chinese[EI]熊进辉；黄继华；张华；赵兴科;.C_f/碳化硅复合材料与钛合金Ag-Cu-Ti-C_f复合焊[J]焊接学报.2010,(05)2010-05-25薛行雁；熊进辉；黄继华；张华；赵兴科；王志平;.AgAlTi-C钎焊C_f/SiC复合材料与TC4接头组织结构[J]材料工程.2010,(05)程东海；黄继华；林海凡；赵兴科；张华;.钛合金激光焊缝的超塑性变形行为及显微组织[J]中国有色金属学报.2010,(01)史留勇；刘义敏；张守全；黄继华；赵兴科；张华;.烧结工艺对脱β层梯度硬质合金梯度结构的影响[J]北京市科技大学学报.2011,(04)，2011-04-28 15:21史留勇；刘义敏；张守全；黄继华；张华；赵兴科;.脱β层梯度硬质合金的制备及组织结构[J]粉末冶金材料科学与工程.2011,(01)2011-02-1马克柯；陈树海；黄继华；夏军；张华；赵兴科;.不锈钢/铝合金激光深熔焊接头微观组织与力学性能[J]应用激光.2010,(06)2010-12-15陈树海；马柯；黄继华；夏军；张华；赵兴科;.钢/铝异种金属双熔池TIG熔钎焊接头的显微组织与力学性能[J]中国有色金属学报.2011,(12)2011-12-15周国栋；陈树海；黄继华；赵兴科；张华;.热传导对双陶瓷热障涂层隔热效果影响研究[J]材料科学与工艺.2012,(02) 2012-04-15史留勇；刘义敏；张守全；黄继华；赵兴科；张华。烧结工艺对脱茁层梯度硬质合金梯度结构的影响[J]北京科技大学学报.2012,(10)2011-04-15唐家伟; 谢淑兰; 赵兴科;Ag-28Cu钎焊TiNiSMA接头的微观组织特征，热喷涂技术, Thermal Spray Technology, 编辑部邮箱2010年04期 67-72赵兴科, 唐佳伟, 黄继华, 张华. NiTi/NiTiNb复合板的钎焊制备与性能. 焊接学报. 2010, 31(6): 73-76吴广森; 靳安民; 马远征; 陈兴; 赵兴科。一种新型寰枢椎复位内固定器的设计及解剖学依据. 中国临床解剖学杂志. 2008, 6: 629-632陈庚，赵兴科，陈俐，王蔚，黄继华，张华 TININB合金激光焊接接头的组织与性能. 热加工工艺，2008，37（17）：99~101王海涛, 黄继华, 朱警雷, 张华, 赵兴科. 反应等离子喷涂TiC/Fe-Ni复合涂层及其耐冲蚀性能. 复合材料学报. 2009-2-15,26(1):74-79[Ei]王蔚，陈俐，赵兴科，黄继华，陈庚。预置填充稀土激光焊接对TiNi形状记忆合金微观组织及成分的影响，稀有金属材料与工程，2008，37(11)：1942-1946[SCi0002699900013EI20084711727323]王蔚，陈俐，赵兴科，黄继华. 预置填充稀土激光焊接对TiNi形状记忆合金功能性的影响，稀有金属材料与工程，2008，37(10)：819-1923[SCi000257378300022EI20084711727323]王蔚，赵兴科，黄继华，陈俐. 激光焊接技术中的研究进展.·航空制造技术2007年增刊. 40-45王蔚; 陈庚; 赵兴科; 黄继华; 陈俐. 形状记忆合金YAG激光焊接. 应用激光. 2008, 3：199~202 王蔚，赵兴科，黄继华，陈俐. 激光焊接工艺参数对NiTi形状记忆合金焊缝成形的影响. 中国激光. 2008, 35(2): 291-296[EI]张强; 王海涛; 黄继华; 赵兴科; 张华. 反应等离子喷涂TiC陶瓷增强金属复合涂层组织性能. 中国表面工程. 32-36 孙占; 黄继华; 张华; 赵兴科; 李曲全. 微合金EH40型船板钢大热输入焊接接头组织和力学性能. 焊接学报, 2008, 29(3): 41-44[EI]杨静，程东海，黄继华，张华，赵兴科，孙占. TC4合金激光焊接工艺参数与接头组织性能研究. 热加工工艺. 2007, 36(23): 15-18王志平，黄继华, 班永华，熊进辉，张华，赵兴科. 反应复合钎焊Cf-碳化硅/Cu-Ti-C/TC4接头组织结构. 材料功程。2008-9-20田亮，黄继华，张志远，赵兴科，张华。用Ti50Cu+W钎料连接Si/SiC复相陶瓷与殷钢的研究。材料工程，2008-9-20朱警雷，黄继华，张华，赵兴科，齐立华. 硬质合金复合环复合工艺的研究进展. 粉末冶金技术. 2008, 26(1): 60-64朱警雷; 黄继华; 张华; 赵兴科. 硬质合金与钢异种金属焊接的研究进展. 焊接，2008，2: 15-19 朱警雷，黄继华，王海涛，徐俊龙，张华，赵兴科. 反应爆炸喷涂制备TiC/Fe-Ni 金属陶瓷复合涂层. 稀有金属材料与工程. 2008-07-15,37(7):1313-1316[EI]朱警雷，黄继华，王海涛，徐俊龙，赵兴科，张华. 反应等离子喷涂TiC/Fe-Ni 金属陶瓷复合涂层的显微组织. 中国有色金属学报. 2008, 18(1): 36-41赵华涛，黄继华，张华，赵兴科，舒大禹. 用Cu-Ti 钎料对Si/碳化硅 陶瓷与低膨胀钛合金的钎焊. 稀有金属材料与工程. 2007, 36(12): 2184-2188[EI]李群，黄继华，张华，赵兴科，齐丽华. Al对Sn-58Bi无铅钎料组织及性能的影响. 电子工艺技术. 2008, 29(1): 1-4齐丽华，黄继华, 赵兴科, 张华. 热—剪切循环条件下Sn3.5Ag0.5CuNi界面化合物生长行为. 焊接学报. 2007, 28(12): 61-64[EI]徐俊龙，黄继华，魏世忠，王海涛，张华，赵兴科. TiC/Fe-Ni金属陶瓷复合涂层反应等离子喷涂研究。稀有金属材料与工程. 2007, 36(suppl3):688-691赵兴科，周旭东，周香平，黄继华，张华. 采用TiZrCuNi扩散钎焊TiNi形状记忆合金. 中国科技论文在线, 2007. 孙占，张华，黄继华，赵兴科，李曲全，杨静. 新型EH40船板钢大热输入量埋弧焊焊接接头组织性能研究. 热加工工艺，2007，36（19）：15-17舒大禹，黄继华，万云，赵华涛，张华，赵兴科. Ti对Al-Ag-Cu反应扩散连接SiCp/2618Al复合材料接头组织及力学性能的影响. 中国科技论文在线. 2007刘慧渊，黄继华，魏世忠，张华，赵兴科. 反应火焰喷涂Ti-Ni-C系陶瓷/金属复合涂层，航空材料学报，2007，Vol.27，No.1, 23-27 赵祖德，许振华，黄继华，魏世忠，赵兴科，张华，Ti的添加方式对反应钎涂碳化物/铁基合金复合涂层组织结构的影响. 航空材料学报，2007，Vol.27，No.4，42-45齐丽华，黄继华，张建纲，王烨，张华，赵兴科，SnAgCu/Cu和SnPb/Cu界面热剪切循环条件下化合物的生长行为，中国有色金属学报，2006, Vol.16，No.10, 1705-1709张建纲，黄继华，戴志锋，张华，赵兴科. 含稀土Sn-Zn-Bi系无铅钎料润湿性能的研究. 中国稀土学报. 2006, 24(5): 586~591刘均波，刘均海，黄继华, 张华, 赵兴科. 粘结相对原位合成TiC钢结硬质合金组织结构和性能的影响. 粉末冶金技术. 2007.25(4):266-270宋桂香，刘均海，黄继华，张华, 赵兴科.TiC/Cr18Ni8钢结硬质合金原位反应合成研究. 材料科学与工艺. 2007，15(2):255-259齐丽华，黄继华，张华，赵兴科. 热-剪切循环条件下Sn-3.5Ag-0.5Cu/Cu(Ni)界面化合物生长行为研究. 稀有金属材料与工程. 2007，36（2）：241-244赵华涛, 黄继华，张华，赵兴科，舒大禹. Si/碳化硅陶瓷与低膨胀钛合金钎焊接头的界面结构及连接强度. 中国科技论文在线. 2006 赵兴科, 蔡伟, 赵连城. 磷离子注入TiNi合金的放射特性. 生物医学工程学杂志. 2003, 20(3): 412~414赵兴科, 王中, 蔡伟, 赵连城 一种NiTi合金耐蚀性能的正交试验研究. 腐蚀科学与防护技术. 2001, 13(1):21~23赵兴科, 王中, 郑玉峰, 赵连城. 抛光技术的现状. 表面技术. 2000, 29(2): 6~7赵兴科, 王中, 蔡伟, 赵连城. TiNi 合金化学抛光工艺及其对耐蚀性的影响. 材料保护. 2001, 34(1): 30~31[ZHAO Xing-ke et al. Chemical polishing technique and its effects on corrosion resistance of TiNi alloy. Cailiao Baohu. 2001, 34(1):30~31(Ch) ]赵兴科, 蔡伟, 赵连城 离子注磷TiNi合金的表面成与相组成. 2001, 功能材料，增刊：1628~1629赵兴科, 王中, 郑玉峰, 赵连城. TiNi合金粉末烧结与燃烧合成工艺. 粉末冶金技术. 2000, 18(3): 214~216Zhao, Xingke; Wu, Ping; Zhou, Yusheng. Source:Rejiagong Gongyi/Hot Working Technology, n 5, p 6-8, July 20 Language: Chinese[EI]赵兴科, 吴平 稀土对高钒铸铁焊条性能的影响. 稀土. 2000, 21(2):40~42赵兴科, 吴平. 稀土高钒铸铁焊条的研制. 热加工工艺. 1999, 1:31~32周玉生, 赵兴科, 阎久春, 杨士勤 新型微束等离子弧焊接电源的研制. 材料科学与工艺,1999,7(Sup.): 45~48赵兴科. 简便实用的铝合金钎焊工艺. 热加工工艺. 1998, 2:53~54赵兴科, 周玉生, 吴平. 新型稀土钢焊条. 稀土. 1997, 18(1): 29~32赵兴科, 毕亚艳, 田野, 蔡伟, 黄永麟, 赵连城 放射性TiNi合金支架的研制与动物实验研究. 2002年材料科学与工程新进展(上). 中国材料研究学会, 北京:446~449 赵兴科, 吴平. 高钒铸铁焊条添加稀土的试验研究. 第九次全国焊接会议论文集. 1: 460~462 张华；赵衍华；张宽；黄继华；赵兴科；陈树海;.2A97铝锂合金搅拌摩擦焊研究[A].第十六次全国焊接学术会议论文摘要集.2011-10-20陈树海；黄继华；马柯；夏军；张华；赵兴科;.Ni箔中间层对不锈钢/铝合金激光深熔焊的影响[A].第十六次全国焊接学术会议论文摘要集.2011-10-20胡杰；姜志忠；黄继华；陈树海；赵兴科；张华;.聚变堆用CLAM钢电子束焊缝显微组织构成与形成机理[A].第十六次全国焊接学术会议论文摘要集.2011-10-20
发明专利
赵兴科；罗俞华；黄继华；张华。多孔钛合金的微波激发自蔓燃合成方法[P].cn200710175922.6.北京科技大学2008-03-12；
赵兴科；陈庚；王蔚；黄继华；张华。一种宽温相变镍钛合金的热扩散制备方法[P].CN200810102524.6.北京科技大学.2008-08-20；
赵兴科；罗俞华；顾伟；黄继华；张华。一种镍钛记忆合金海绵及其混盐压坯高温合成制备方法[P].CN200810116153.7.北京科技大学.2008-11-19；
黄继华；熊进辉；薛行雁；张华；赵兴科；田亮。一种Cf/碳化硅复合材料与钛合金的连接方法[P].cn200910076621.7.北京科技大学2009-06-24；
张华；吴会强；黄继华；赵兴科。一种分体式搅拌摩擦焊搅拌头[P].CN200910203401.6.北京科技大学.2009-10-21；
张华；吴会强；黄继华；赵兴科。可改善焊缝性能的多足式搅拌摩擦焊焊接方法[P].CN200910203403.5.北京科技大学.2009-10-21；
张华；吴会强；黄继华；赵兴科。一种搅拌探针可拆卸重复使用的分体式搅拌摩擦焊搅拌头[P].cn200910203404.X.北京科技大学2009-10-21；
张华；吴会强；黄继华；赵兴科。可改善焊缝性能的多足式搅拌摩擦焊搅拌头[P].CN200910203405.4.北京科技大学.2009-10-21；
张华；黄继华；吴会强；赵兴科；李正华。一种铝基复合材料板材的搅拌摩擦制备方法[P].CN200910203402.0.北京科技大学.2009-10-21；
张华；吴会强；黄继华；赵兴科。可改善焊缝性能的多足式搅拌摩擦焊搅拌头[P].cn200920153929.2.北京科技大学2010-07-21。