更新时间：2024-09-21 12:13
王清辉，男，1972年生，江苏省南通市人，本科、博士毕业于南京航空航天大学机械工程专业。获2016年国家科技进步二等奖1项，2013年广东省自然科学奖1项，2013、2016年广州市科技进步二等奖各1项。
现任华南理工大学机械与汽车工程学院教授（三级）、博士生导师，机械制造工程系主任，“兴华工程”学术团队负责人；兼任中国机械工程学会机床专业委员会常委、中国工业与应用数学学会几何设计与计算专委会委员、中国计算机学会计算机辅助设计与图形学专业委员会委员，《图学学报》、《自动化与信息工程》等期刊编委；入选教育部“新世纪优秀人才支持计划”（2012），广东省“千百十工程”省级培养对象（2014）。
长期从事数字化设计与制造领域的研究工作，目前的主要研究方向包括：
CAD/CAM开发技术、数字化制造及智能化制造技术；
多尺度功能结构的CAD建模与主动设计；
虚拟现实（VR）交互技术及其应用开发；
面向复杂制造环境的机器人离线编程技术。
围绕上述研究方向，近年来主持了国家自然科学基金面上项目2项、教育部“新世纪优秀人才支持计划”项目1项、教育博士点基金项目1项；广东省与广州市科技计划项目6项；并承担多项企业委托研发项目。发表SCI学术论文27 篇、EI收录论文11篇，著作2部。承担的代表性科研项目包括：
面向高效制氢的多尺度表面功能结构主动设计与制造的理论研究，2009年度国家自然科学基金面上项目；
多茸金属纤维多孔载体的可控精细特征建模与形貌协同设计，2012年度国家自然科学基金面上项目；
新一代智能CAM系统的研发与产业化，2014年度广州市产学研协同创新重大专项项目；
支持协同的开放式CAD平台的研究与开发，广东省科技计划工业攻关项目；
特征失效问题的理论分析与修复机理研究，教育部博士点基金项目；
基于移动机器人的通讯机房智能检测系统的研究与开发，深圳华为技术有限公司委托项目；
新一代三自由度汽车驾驶模拟机的研发，企业委托项目
Wang QH, Zhang XM, Li JR, Tang CS, (2015) Prediction of toolpath redundancy for NC machining of freeform surfaces based on automatic recognition of steep wall features, International Journal of Production Research (DOI: 10.1080/00207543.2014.997401)
Li JR, Tang C, Wang QH*, A proxy approach to integrate heterogeneous CAD resources for distributed collaborative 设计, International Journal of Computer Integrated Manufacturing. 2015,28(6):593-606. (SCI: CF1YZ)
Zhou W, Wang QH, Qiu QF, Tang Y, et al., Heat and 质量 Transfer Characterization of Porous Copper Fiber Sintered Felt as Catalyst Support for 甲醇 Steam Reforming, Fuel,2015,145:136-142.( SCI: CA7HQ)
Zhou W, Wang QH, Li JR, Tang Y, et al. 氢 Production from Methanol Steam Reforming using Porous Copper Fiber Sintered Felt with Gradient Porosity, International Journal of Hydrogen 能量, 2015, 40:244-255 (SCI: CA1QR)
Hu GH, Wang QH, Zhang GH, Unsupervised defect detection in textiles based on Fourier analysis and wavelet shrinkage, Applied Optics, 2015,54(10):2963-2980. (SCI)
Hu GH, Zhang GH, Wang QH. (2014) Automated defect detection in textured materials using wavelet-domain hidden Markov models, Optical Engineering. 53(9) 093107 (17 pp) (SCI: AP7TZ)
Zhou W, Wang QH, et al. (2014) Characterization of Three- and Four-point Bending Properties of Porous Metal Fiber Sintered Sheet. Materials \u0026 设计, 2014, 56:522-527. (SCI: AB3WO)
Wang QH, Huang X, et al. (2013) Three-dimensional reconstruction and morphologic characteristics of porous metal fiber sintered sheet. Materials Characterization. 2013,86:49-58 (SCI : 278ED)
Huang X, Wang QH, et al. (2013) A simple fracture 能量 prediction method for fibre network based on its morphological features extracted by X-ray tomography, Materials Science and Engineering A. 585:297-303. (SCI:241CF)
Zhang CJ, Zhou W, Wang QH, et al. (2013) Comparison of static contact angle of various metal foams and porous 铜 fiber sintered sheet, Applied Surface Science, 276:377-382. (SCI: 144YT)
Zhou W, Tang Y, Wang QH. (2013) Optimization of Catalyst Loading for Porous Copper Fiber Sintered Felts Used in 甲醇 Steam Reforming Microreactors, Chemical Engineering \u0026 Technology. 36(2):307-314. (SCI: 096NE)
Li ZT, Wang QH, Tang Y, et. al. (2013) Light Extraction Improvement for LED COB Devices by Introducing a Patterned Leadframe Substrate Configuration, IEEE Transactions on Electron Devices. 60(4):1397-1403.(SCI:115ON)
Li JR, Wang QH, et al. (2012) A CAD-Integrated Disassembly Constraint Generation Approach for Product 设计 Evaluation, International Journal of Computer Integrated Manufacturing, 25:565-577. (SCI:962PA)
Yuan W, Tang Y, Wang QH, et al. (2011) Dominance evaluation of structural factors in a passive air-breathing direct 甲醇 fuel cell based on orthogonal array analysis, Applied 能量 2011,88:1671-1680. (SCI: 734TF)
Wang QH, Li JR, et al. (2011). Synthesis of fractal geometry and CAGD models for multiscale topography modeling of functional surfaces, J. Cent. South Univ. Technol., 18:1493−1501. (SCI:829VF)
Wang QH, Li JR, et al. (2010) Live parametric 设计 modifications in CAD-linked virtual environment, International Journal of Advanced Manufacturing Technology, 50:859-869. (SCI:662UY)
Li JR, Wang QH, et al. (2010) A novel connector-knowledge-based approach for disassembly precedence constraint generation, International Journal of Advanced Manufacturing Technology, 49:293-304. (SCI: 607SL)
Li 金钟炫 and Wang Q.H. (2010) A rough set based data mining approach for house of quality analysis, International Journal of Production Research, 48:2095-2107.(SCI: 580RO)
Wang QH and Gong HQ (2009) Computer-aided process planning for fabrication of three-dimensional microstructures for bioMEMS applications, International Journal of Production Research, 47:6051-6067. (SCI:535QT)
Wang QH, Li JR and Gong HQ (2007). Graphics-assisted cutter orientation correction for collision-free five-axis machining, International Journal of Production Research, 45:2875-2894; (SCI: 168UQ);
Wang QH, Li JR and Zhou RR (2006). Graphics-assisted approach to rapid collision detection for multi-axis machining, International Journal of Advanced Manufacturing Technology, 30:853-863. (SCI: 111XB).
Wang QH and Li JR (2006). Interactive visualization of complex dynamic virtual environments for industrial assemblies, Computers in Industry, 57:366–377. (SCI: 034WN).
Wang QH, Li JR and Gong HQ (2006). A CAD-linked virtual assembly environment, International Journal of Production Research, 44:467-486. (SCI: 002AO).
Wang QH and Li JR (2004). A rough set-based fault ranking prototype system for fault diagnosis, Engineering Applications of Artificial Intelligence, 17:909–917. (SCI: 881NI).
Gong HQ, Ramalingam N, Chen L, Che J, Wang QH (2006). Microfluidic handling of PCR solution and 脱氧核糖核酸 amplification on a reaction chamber, Biomedical Microdevices, 8:167-176. (SCI: 041WG).
Wang QH and Li JR (2004). A desktop VR prototype for industrial training applications, Virtual Reality, 7:187-197.
Wang QH, Tan Y and Gong HQ (2003). An integrated system for real-时间 PCR analysis based on micro-fluidic biochip, International Journal of Computational Engineering Science, 4(2):285-288.